Help....

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nerocuba

Nerocuba

Active Member
Posts
94
Location
Hertfordshire
Changing the UJs on the lower steering column and am stuck.... And the lights fading.
Taken all the bolts out of the old UJs but now can't get the arm out... It's bloody tight in there too..... Am I missing something? Is there something else I need to take off in order to remove the lower steering arm?
My first job and its gone wrong
 
Nerocuba said:
Changing the UJs on the lower steering column and am stuck.... And the lights fading.
Taken all the bolts out of the old UJs but now can't get the arm out... It's bloody tight in there too..... Am I missing something? Is there something else I need to take off in order to remove the lower steering arm?
My first job and its gone wrong
Click to expand...
Don't be too hard on yourself, even the easiest jobs can turn in to a pain for the best if us.
IIRC you have to take the bolts right off those steering column UJ's before the clamps come off. I think it's that, there's something slightly odd about them anyway.
EDIT
I think the bolt acts like a woodruff key on to the shaft, so the clamps won't slide off until the bolts are slid right out.
 
Al2O3 said:
Don't be too hard on yourself, even the easiest jobs can turn in to a pain for the best if us.
IIRC you have to take the bolts right off those steering column UJ's before the clamps come off. I think it's that, there's something slightly odd about them anyway.
EDIT
I think the bolt acts like a woodruff key on to the shaft, so the clamps won't slide off until the bolts are slid right out.
Click to expand...
I have literally taken the bolt out altogether....the shaft is ver loose and I can slide it with my hand back and forth but there isn't enough room for them to come off the splines... I'm pulling my hair out out.
 
If I remember correctly you have to knock it right to the extreme of the splines travel in one direction in order to disconnect it. I used a long wooden drift and a hammer last time.
 
I haven't got enough hair to pull out :(
Have you loosened the UJ on the box input shaft? I think you might have to loosen that one too. Although I can't remember having to do that @Retroanaconda might have hit the nail on the head there.
 
All done thanks guys.... Was a nightmare but with a bit of not so gentle persuasion, got it out.... Thank for your help. This is the old one one if interested.
Thanks again
 

Attachments

  • IMG_20191215_152139.jpg
    IMG_20191215_152139.jpg
    308.3 KB · Views: 91
You know what, it only started getting cold now, so glad I got it finished in time. First dirty job and it feels like a huge achievement lol drives like a reasonably good one now hahaha.
Thanks again, that's why I love this site, lots of good people always willing to help. :)
 
You must log in or register to reply here.

Similar threads

Seaswood
Steering assembly removal/Bulkhead
2
Replies
37
Views
3K
Seaswood
Seaswood
JokerUK
Steering column removal
Replies
6
Views
2K
neilp1
N
A
Wrong bolts?
Replies
7
Views
786
Anaconda
A
dag019
Station wagon second row seatbelt fitting
Replies
6
Views
427
dag019
dag019
R
Steering feels like a tooth is missing
Replies
5
Views
772
Anaconda
A
Back
Top