Help With LED Indicators

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

LandyLuke86

Member
Posts
25
Location
Herts
I have just upgraded all of my Lights to LED's however the indicator side lights do not connect.

Does anyone know what I need to do?

Picture attached.
 

Attachments

  • IMG_3027.JPG
    IMG_3027.JPG
    41.2 KB · Views: 136
I think if it was me id be cutting them, putting individual connectors on and connecting them to the corresponding wires. It’s probably the easiest way.

Ash
 
Cheers Ash, as I am not that great with electrics.

Any ideas on what connectors I should use and where to buy them from?

Cheers!
 
LandyLuke86 said:
Cheers Ash, as I am not that great with electrics.

Any ideas on what connectors I should use and where to buy them from?

Cheers!
Click to expand...

The easiest way would be the red spade connectors, get the covered ones which will keep the weather out a bit better. You can get them on eBay or you could nip to Halfords and they’ll have them in smaller quantities.

Have a look on YouTube if your not sure on how to use them. But it’s straight forward. Cut the plugs off, strip some wire, put the connectors on and plug them in.
 
Do I need to disconnect the battery to cut the wires?

It would be a lot easier if I don't have too but, wanted to check.

Thanks.
 
Make sure you have a LED flasher unit, else they wont work, unless they come with those horrible resistor things.
 
You must log in or register to reply here.

Similar threads

s8ndst0rm
Warning Lights - AMR2628
Replies
4
Views
272
s8ndst0rm
s8ndst0rm
D
Tail lights not working
Replies
2
Views
188
miktdish
miktdish
J
LED lights
Replies
9
Views
1K
miktdish
miktdish
J
Brake lights
Replies
4
Views
528
300bhp/ton
300bhp/ton
C
Warning Light for WIPAC indicator module not lighting up.
Replies
1
Views
426
miktdish
miktdish
Back
Top