RorySeries3
New Member
- Posts
- 1
Hello, This is my first post! After just two weeks with my 'new' 1984 Series 3 2.25 petrol which had £3k of work to address what were likely to be the most likely things to fail - it is now failing at startup. I turn the ignition on, it fires up ok, put it into gear and the engine just stalls within a few seconds.
I went into this with my eyes open, but having paid quite a bit for a thorough inspection and preventative fixes I was hoping I would at least get through the summer without a breakdown. Worse still I'd hoped that I would have more time to play around and practice before having to try anything major myself. If anyone has a basic checklist I could run through before spending even more money, I'd be enormously grateful.
Rory
I went into this with my eyes open, but having paid quite a bit for a thorough inspection and preventative fixes I was hoping I would at least get through the summer without a breakdown. Worse still I'd hoped that I would have more time to play around and practice before having to try anything major myself. If anyone has a basic checklist I could run through before spending even more money, I'd be enormously grateful.
Rory