Hi folks, help needed, I've fitted my snorkel today to my disco 1 300tdi abs model...yes I bought the correct snorkel....however when everything has been installed and sealed correctly...the Airbox is now roughly 100mm further across than it was and doesn't line up with the airflow meter...am I missing something....
Disco 1 Help required if poss
- Thread starter scoots
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,609
Thats a shame, nothing is straight forward sometimes, anyway a bit of engineering and with round flexible duct or even hard plastic duct, and a vertical 90deg elbow, but that maybe a bit fiddly.
If so with a bit more work, I’d remove the existing air box outlet and blank the hole, further along the side cut out a similar size hole to suit and fit and seal an outlet to the air box , which should allow more space to form a flexible duct around, across and then to terminate at the airflow meter inlet, with maybe a 90deg elbow fitted.
If so with a bit more work, I’d remove the existing air box outlet and blank the hole, further along the side cut out a similar size hole to suit and fit and seal an outlet to the air box , which should allow more space to form a flexible duct around, across and then to terminate at the airflow meter inlet, with maybe a 90deg elbow fitted.
discool
Well-Known Member
- Posts
- 13,609
Thats handy, when u do it don’t forget the photos of whats involve
I will mate...well that's if it works lolThats handy, when u do it don’t forget the photos of whats involve
- Posts
- 44,832
- Location
- East Dorset
When you've got the airbox into position, don't forget to block up the other holes in it otherwise the snorkel will not keep all the water out! Silicon sealant for the l;ickle ones!
- Posts
- 44,832
- Location
- East Dorset
I meant the holes in the airbox, not in the bodywork etc where the snorkel has been attached.All the holes have been sealed with sika sealant...I'll struggle to get the thing off should i ever need to
Similar threads
