Disco 2 Help removing ace valve block!!

mad85

Active Member

Posts

503

Location

Malta

• Dec 20, 2021

• #1

I cant seem to get the pipes going to the ace valve block off. Following rave manual it seems to be straight forward enough but im pulling and they are not moving. Yes i removed the two bracket and the weak looking clips underneath

 

Hellastony

Active Member

Posts

244

Location

Essex and Pelion, Greece

• Dec 20, 2021

• #2

They corrode, steel and aluminium don't mix..... Most people just cut them off and then clean out the mess. Best to replace with hydraulic couplings and then get hoses made up to replace the steel pipes, either completely or as much as you want.

 

MJI

Well-Known Member

Posts

15,982

Location

Worcester

• Dec 20, 2021

• #3

I had to cut pipes remove the block then force the stubs out before getting it machined for hoses

 

mad85

Active Member

Posts

503

Location

Malta

• Jan 19, 2022

• #4

sorry forgot to update this. at the end i used a prybar and they came right out. there was no corrosion but they were really stuck!