Help !!! Part needed

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MK2TEN

Member
Posts
18
Location
LIVERPOOL
Am struggling to find this part it's the pipe from fuel filter to the lift pump on my 300tdi. Land Rover list it simply as 'hose lift pump/filter - 300Tdi Diesel' with the following part numbers (they each superseded the previous numbers)
ESR2991, ESR3371, ESR4183 & WJP108350 which was latest number before the part was removed from service.

I have tried everywhere but getting desperate as I have a diesel leak.

Has anyone got one new or second hand to sell ??? I will post a pic below


Many thanks
 

Attachments

  • IMG_2032.JPG
    IMG_2032.JPG
    231 KB · Views: 186
Am struggling to find this part it's the pipe from fuel filter to the lift pump on my 300tdi. Land Rover list it simply as 'hose lift pump/filter - 300Tdi Diesel' with the following part numbers (they each superseded the previous numbers)
ESR2991, ESR3371, ESR4183 & WJP108350 which was latest number before the part was removed from service.

I have tried everywhere but getting desperate as I have a diesel leak.

Has anyone got one new or second hand to sell ??? I will post a pic below


Many thanks

hi

have u tried ebay , seeing a few company's that sell fuel pipe etc , or maybe a local motor factors
 
Yeah been on eBay there is loads of the other pipe from the fuel filter messaged loads aswell with them to see if they have the other and no one seems to have it.

I live near the LR centre and they can't even get hold of one for me
 
That's promising thank you I will contact them tomorrow just hope I was given the right part number. Ha ha. Thanks again great help will post tomorrow let you know of it is.
 
As i can see it's construction it's very easy to DIY if you want to make it like new cos the banjo and the fitting at the other end are available in specialised stores and the rubber pipe is obvious... if the rubber part is leaking why dont you just replace that?
you just have to fit the pipe to the fittings and if you measure them it's easy to source, seems around M10 - M12

you need only these at the proper dimensions, all from the same seller:
1. http://www.ebay.com/itm/Metric-BANJ...-Oil-Tube-Pipe-Fuel-Filter-Head-/280778348867
2. http://www.ebay.com/itm/BRASS-Male-...BSP-UK-/271178314986?var=&hash=item84bf898930
3. http://www.ebay.com/itm/SAE-J30-R6-...m-13mm-/271066095063?var=&hash=item84bd86c453

that's WJP108350, very simple construction
WJP108350.jpg
 
Last edited:
As i can see it's construction it's very easy to DIY if you want to make it like new cos the banjo and the fitting at the other end are available in specialised stores and the rubber pipe is obvious... if the rubber part is leaking why dont you just replace that?
you just have to fit the pipe to the fittings and if you measure them it's easy to source, seems around M10 - M12

you need only these at the proper dimensions, all from the same seller:
1. http://www.ebay.com/itm/Metric-BANJ...-Oil-Tube-Pipe-Fuel-Filter-Head-/280778348867
2. http://www.ebay.com/itm/BRASS-Male-...BSP-UK-/271178314986?var=&hash=item84bf898930
3. http://www.ebay.com/itm/SAE-J30-R6-...m-13mm-/271066095063?var=&hash=item84bd86c453

that's WJP108350, very simple construction
View attachment 111582
Thanks for the links I think this is the route am going to have to go down
 
Thanks for the links I think this is the route am going to have to go down
I've used this piping for garden irrigation systems, but it's not any old piping. Soften it up with hot water and place it on the fitting, as it cools it shrinks tight and looks just like the picture posted, so you will need a very sharp blade to cut it away from the fitting.
 
I've used this piping for garden irrigation systems, but it's not any old piping. Soften it up with hot water and place it on the fitting, as it cools it shrinks tight and looks just like the picture posted, so you will need a very sharp blade to cut it away from the fitting.
Thanks for the advice
 
I have to ask. Have you tried your local main dealer.?
I had the same on my 300 Tdi just over 3 years ago and they had it on the shelf.
Just because it's an older model don,t knock the Landrover dealers.
 
I've just checked and I think I've one. My problem is, now you have highlighted how rare they are I can't decide weyhwre to part with it:(
 
Back
Top