Help needed

I've changed the anti roll bar bushes on my Freelander today. All went really well bolts undone nice and easy new bushes went on a treat. Got to tighten the very last bolt on the passenger side bush and got it half tight and now the bolt just spins. Won't tighten and won't come out. All the other bolts are tight and secure. Anyone got any ideas. tried local garages who are either shut or can't do anything until middle of next week. I'm Bromsgrove way if anyone can help. Also would it be Ok to drive given its one bolt and half in? Knew that I should have just left alone Grrrrrrrr

The captive nut will have broken off inside the box section. The subframe will need removed to get access. Personally, I would just drive it as is - if it doesnt rattle, then fine. If it does or works loose I would fix it.

Thanks mate. there's no rattle or knocking like it was before the new bushes went on. So I think I'll see how it goes. I'm no mechanic so if it did work loose as all the other bolts are secure as is the loose one to a certain extent take nothing would fall off etc lol.

Try 4x4 Development in Droitwich - cracking guys and do the work I can't do myself on my Freelander