Help before i get lynched !!!

I

Insane Drifter

New Member

Posts

3

• Sep 28, 2006

• #1

Hello can anyone help me, my key fob has broken , i bought another one but it doesnt work and the alarm goes off every time i open a door . Does anybody know how to get this fob to work with my disco? Im starting to worry my neighbours may hang me from the nearest lamppost!!!!

 

Gareth Coe

New Member

Posts

1,358

Location

CAMVLODVNVM

• Sep 28, 2006

• #2

No idea - perhaps you should post this question down in the Disco section. Someone down in there should be able to help you

 

Spyderman

New Member

Posts

5,196

Location

Luton

• Sep 29, 2006

• #3

Have you been near a mobile phone mast? my key was wiped out by one. you can reprogram the system by entering the code using the key in the ignition barrel, turning it a set number of times in each direction. it should tell you how to do it in the handbook. Worth a try.

 

C

clivees

Well-Known Member

Posts

2,070

Location

Somewhere in deepest darkest Hampshire

• Sep 29, 2006

• #4

Most (Good) key fob alarm systems change the code each time they are used
and they need to be kept in-sync by 5 or 6 codes, this allows for accedental key presses.
As Spyderman says there is usually a re-sync process involving putting the key in the ignition and pushing some buttons.
The manual or the local dealer or Disco boys should know.

Regards
Clive

Ps
having a quick google i found the following
Pressing either of the buttons rapidly 5 times resets the code.
or
Insert the key into ignition switch and turned it to "II", pressed unlock long(10sec).

 

I

Insane Drifter

New Member

Posts

3

• Sep 30, 2006

• #5

Thanks to those that replied , i will give it a go and hope for the best

Thanks again

 

D

discomania

Well-Known Member

Posts

6,947

• Oct 1, 2006

• #6

There is a way with the key in the door lock, you like open and lock it 6 times, then unlock and pause for a second, and do it again etc... and it will disable the alarm/immoboliser. The procedure is in the manual, I'll have a look for mine.