Hello All,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

trevorn

New Member
Posts
3
Location
Herefordshire
I live in Herefordshire, not far from the Welsh border. I have previously owned three Range Rover Classics (not all at the same time) and I have just bought a 2005 facelift Freelander 1 to do the off-road things that I don't want to do with my Jaguar XF.
The Freelander has done 190,000 miles but is still quite tidy with no visible rust damage. It has one problem that I am looking for a solution to. Some of the nearside dipped headlight beam shines up into the tree-tops. I have just had the headlights aligned by my local MOT garage and they would pass the test because this rogue part of the beam does not appear on the screen in the tester. The man at the garage is puzzled and thinks that I will have to get a new headlight unit. The local Land Rover expert thinks that the optics of the lens have been changed by too much polishing.
Has anyone had the same problem and if so, what did you do to fix it?

Cheers,

...Trevorn
 
Hi trev and welcome, i had a freelander 1 03 and seem to recolect it had plastic lens fronts, may be thay have worped for some reason, could be bulbs getting hot, may be used on full beam a lot
 
Welcome to LZ - this forum is for saying hello. You should post questions about your Freelander in the Freelander section - you're more likely to get a response and if there's a resolution (which hopefully there will be) anyone searching in future to fix the same problem will find it.
 
Hi trev and welcome, i had a freelander 1 03 and seem to recolect it had plastic lens fronts, may be thay have worped for some reason, could be bulbs getting hot, may be used on full beam a lot
Thanks Tony. Your idea seems more likely than too much polishing. I'll just have to raid the piggy bank and get a new one.
 
Back
Top