heater matrix

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
O

owen88

Member
Posts
61
Location
North Lincolnshire
Hi chaps

Recently ive just removed my dashboardto get access to the matrix heater. ive replaced the heater matrix and replaced the 0 rings aswell.
Ive now put the dashboard back together apart from the odd parts.
Last night i put a new battery in and started her up and discovered that the top metal hose has a leak, however the allen key bolt is fully tight. wondering if someone could give me some advice on where ive goone wrong.
 
When you removed the pipes you should have noticed there is a cut out in them. This cutout MUST be engaged correctly in housing it goes into or you will have a leak. Just back off screw and twist pipe either way until it is engaged on peg then push in properly, tighten screw.
 
Last edited:
i will defiantly give that a try after work thanks wammers.
Do you know the size of the bolt thread type etc just wanna get a stainless bolt as mine seen better days lol
 
Just a quick message ive managed to undo the bolts and undo the hose does the left hand hose as u look into the engine go to the top of the matrix heater and then the right hand hose fit at the bottom and go into the engine block. Hope this makes sense
 
owen88 said:
Just a quick message ive managed to undo the bolts and undo the hose does the left hand hose as u look into the engine go to the top of the matrix heater and then the right hand hose fit at the bottom and go into the engine block. Hope this makes sense
Click to expand...

R/H pipe hose goes to back of head. L/H pipe hose connects to pipe from front of engine T'd to hose from header tank. R/H goes to bottom of matrix L/H to top.
 
Screw is threaded all the way to the head.
Bolt has an unthreaded shaft portion with a screw thread at the end.
Set screw (function) is for preventing rotation or other movement so may be a Grub screw or a Cap screw (for example). Merkans call grub screws set screws. Also call split pins Cotter pins, which they aren't.

PedantsRUs - procuring engineering fasteners since 1974. Grumpy this morning.
 
Last edited:
Castor said:
Screw is threaded all the way to the head.
Bolt has an unthreaded shaft portion with a screw thread at the end.
Set screw (function) is for preventing rotation so may be a Grub screw or a Cap screw (for example). Merkans call grub screws set screws. Also call split pins Cotter pins, which they aren't.

PedantsRUs - procuring engineering fasteners since 1974. Grumpy this morning.
Click to expand...

Look up socket headed cap screw. :D:D
 
wammers said:
Look up socket headed cap screw. :D:D
Click to expand...

:behindsofa:

Nuts also have various descriptions....Hexagon, Castillated, half, Nyloc, Brazil, Walnut,Pecan and Hazel to name a few. Washers come in various types...Fan Disc, spring, Dish, front loading, top loading and Pot.
:violent::hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi:bolt:

Certainly looks like someone is not having a very "Good Friday" Tony :D
 
hi chaps

Just a massive thankyou for all your help she now up and running with no leaks whoop whoop. Since firing her up ive noticed srs symbol on the dash??
 
Irishrover said:
:behindsofa:

Nuts also have various descriptions....Hexagon, Castillated, half, Nyloc, Brazil, Walnut,Pecan and Hazel to name a few. Washers come in various types...Fan Disc, spring, Dish, front loading, top loading and Pot.
:violent::hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi:bolt:

Certainly looks like someone is not having a very "Good Friday" Tony :D
Click to expand...

Would seem so John. :D:D
 
owen88 said:
hi chaps

Just a massive thankyou for all your help she now up and running with no leaks whoop whoop. Since firing her up ive noticed srs symbol on the dash??
Click to expand...

Did you switch ignition on with yellow SRS plug unplugged from instrument cluster or passenger bag not plugged in? Indeed did you remember to plug them in at all?
 
Castor said:
Then there's those triple square hex head bolts that hold the brake calipers on that are done up ludicrously FT...

Whinge, moan, grump.... knuckles.
Click to expand...

Do you mean twelve point bihex bolts? Proper tools work wonders. Cheap ****e fails more often than not.
 
The twelve point bihex it turned out did the job; the original bolt geometry on mine (factory bolt I suppose, maybe?) was "triple square" (so my *real* guru tells me) which is apparently a bit pointier at the corners. - bihex socket fits OK but not perfectly and did the job. New bolt is true bihex and an actual fit in the socket......
Triple square female sockets are made of special unobtanium.
 
Castor said:
The twelve point bihex it turned out did the job; the original bolt geometry on mine (factory bolt I suppose, maybe?) was "triple square" (so my *real* guru tells me) which is apparently a bit pointier at the corners. - bihex socket fits OK but not perfectly and did the job. New bolt is true bihex and an actual fit in the socket......
Triple square female sockets are made of special unobtanium.
Click to expand...

I have 2 types of 12 point sockets. Some are slightly rounded and the others are sharper and more slotty, if that makes any sense? If you look down the end they're definitely different. The more rounded ones fitted the caliper bolts best.
 
Hey Owen 88 just finished my matrix had it leak twice , the second time I looked with a mirror from behind the the heater pipes and could tell they were not seating properly , could swear the 1st 2 times it was in right as u know hard to see back there. The pipes will be centered in the hold bracket and your good to go.
 
You must log in or register to reply here.

Similar threads

A
P38A Heater matrix o-ring / pipes - advice needed !
2
Replies
23
Views
2K
romanrob
R
T
Pressure Build Up on Hoses and Overheating 2.5na 110. Help
Replies
2
Views
555
the-prince-e-paul
T
P
Disco 4 Crossover pipe blowing
Replies
17
Views
2K
Graculus
Graculus
J
300 tdi overheating...help!
2 3
Replies
56
Views
9K
jimleshed
J
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
4K
Blob
Blob
Back
Top