Afternoon all.
I've moved over from the RR section as I had to lose my beloved P38. A couple of years with an RR Sport under warranty almost drove me round the bend so I have bought a D2. As I did with the Rangy I've overcome most issues by reading on here before I start but I've come to a dead end with the seats. I think that the PO tried to get them working with some aftermarket switches even though all of the wiring is there!
Anyway my problem is that I've got connector C969 under the seat. It's a four way connector with; pink, black, light green & pink/white cables. A nose around inside the seat comes up with four bare cables!!! These are red, green, black & black. Are these what should be connected into C969? If so, which goes to which?
I've moved over from the RR section as I had to lose my beloved P38. A couple of years with an RR Sport under warranty almost drove me round the bend so I have bought a D2. As I did with the Rangy I've overcome most issues by reading on here before I start but I've come to a dead end with the seats. I think that the PO tried to get them working with some aftermarket switches even though all of the wiring is there!
Anyway my problem is that I've got connector C969 under the seat. It's a four way connector with; pink, black, light green & pink/white cables. A nose around inside the seat comes up with four bare cables!!! These are red, green, black & black. Are these what should be connected into C969? If so, which goes to which?