Heated seat element
- Thread starter Uttamt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Back rest or base? Back rest is easier than the base. The seat base isn's so easy but it's doable at home if you have time.
Basically you have to strip of the leather cover to gain access to the elements.
It's definitely worth measuring the elements resistance before ripping the seat apart
Basically you have to strip of the leather cover to gain access to the elements.
It's definitely worth measuring the elements resistance before ripping the seat apart
I would. You'll struggle to get to the hog rings and clips if you don't take the seat out.
thebluemax
Active Member
- Posts
- 163
my passenger one wont heat up either, neither back or base yet the switch lights up....what could that be then ?
Relay, wiring or elements.
thebluemax
Active Member
- Posts
- 163
yes..does the relay control both seats or individual ones as the driver side works ok ? got a feeling its the elements so will have to bung the multi meter on the plug at the seat end to find out.
thebluemax
Active Member
- Posts
- 163
how do you check the relay then ? what does it even look like, all I can see under the seat is the amp and a connector with a cable going up into the seat. again thanks for any info.
The seat is held in by 4 very obvious Torx bolts. If you a struggling to work out how to remove the seat, then you'd best leave replacing the elements to the professionals.
Rimini-Scott
Active Member
- Posts
- 194
- Location
- Norfolk
A bonus to read this as I have the same problem with my passenger seat.
thebluemax
Active Member
- Posts
- 163
going to have a go at this when I come back from france next week, although I'm working in the dark information wise.
Didn't get a link to read.
Rimini-Scott
Active Member
- Posts
- 194
- Location
- Norfolk
Thanks for the heads up it made me go and look at mine today. I think I had the same problem as you so I took some pictures that might help others
In the first picture there is a black wire with a white end hanging down behind the largest white metal hoop, this was pushed through the circular hole in the seat base above it but it turned out it was not connected, once I pushed it back through and reconnected it the heated element fine, to stop it coming off again I put a cable tie round either end and one through the middle of both to prevent it coming off again.
In the first picture there is a black wire with a white end hanging down behind the largest white metal hoop, this was pushed through the circular hole in the seat base above it but it turned out it was not connected, once I pushed it back through and reconnected it the heated element fine, to stop it coming off again I put a cable tie round either end and one through the middle of both to prevent it coming off again.
Similar threads
