Heated Rear Window Switch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

meego

Well-Known Member
Posts
10,886
Location
Caledonia
Why are these so feckin expensive 🤔
1727892385596.jpeg
 
Might not be local to you but it is the Newbury spares day is at the weekend, I am sure there will be some available there.
 
Thanks for your posts, recommendations and sympathy guys. I ended up ordering this from eBay at £85 😭 The plastic surround on my own one is cracked though, and the fog light switch was I bit sticky.
IMG_3523.png
 
I split the original switch open as it was goosed anyway, but looking at it I’m buggered if I know where the money is. There is less to it than the hazard light switch and it’s only £15 !!! I’m guessing these break more and it’s supply and demand (or just robbing gits)
 
@meego

My fog light is on the coloum,opposite side to the lights. And I have a dash light/interior light switch on that plastic.

What year is your motor ? I like to know all the little changes they make
(Mines an 85 still on original loom)
 
@meego

My fog light is on the coloum,opposite side to the lights. And I have a dash light/interior light switch on that plastic.

What year is your motor ? I like to know all the little changes they make
(Mines an 85 still on original loom)
It’s an 89 90. It came out of Manchester Airport and has a cast aluminium plate on the drivers side seat box with the airport details on it.
 
@meego

My fog light is on the coloum,opposite side to the lights. And I have a dash light/interior light switch on that plastic.

What year is your motor ? I like to know all the little changes they make
(Mines an 85 still on original loom)
The interior light (equivalent of one candlelight) has the switch on it.
 
It’s an 89 90. It came out of Manchester Airport and has a cast aluminium plate on the drivers side seat box with the airport details on it.
interesting my 110 is '89 but I had originally the same setup as @Hicap phill and then kept that setup and switch positioning when I upgraded to 300tdi looms and just made a little extension loom to take the fog light to the column..
 
Back
Top