Biglad2222
Member
- Posts
- 35
- Location
- Tayside
Yea no signs of antifreeze and yea i think so to
Headlights staying on
- Thread starter Biglad2222
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Or sunroof / a/c drains all fixes available using search facility,top right.Deffo no Anti-freeze in the system you mean? (He said, helpfully).
As long as your expansion bottle is staying solid on a level and not showing any water loss then it is most likely a poor "pollen-filter" sealing or a leak around the screen or the like.
- Posts
- 16,365
- Location
- Benfleet, Essex
- Posts
- 4,653
- Location
- Rotherham
Yep learn something new everyday don't weYe-Gods! There's a search facility?Why didn't anyone say anything?
Biglad2222
Member
- Posts
- 35
- Location
- Tayside
Voltage reading on battery reading 13.99v with and without accessories on
Biglad2222
Member
- Posts
- 35
- Location
- Tayside
Again battery disconnected overnight and whn started everything worked fine for about 10 mins now back to square one light o again and windows, door locks,no interior lights work
- Posts
- 12,634
- Location
- Sud ouest France !
Remove your driver's seat and unbolt the becm, then undo the torx screws on the top and look inside. I had one in the garage that had a swimming pool in the driver's footwell. The becm had white spots and humidity everywhere in it. I sent the becm to Callrova to have it tested and checked out.
It may be worth a look or a drying session.
You need to find the source of the leak, pollen filter screws it windscreen top where the side of the car joins the roof panel.
It may be worth a look or a drying session.
You need to find the source of the leak, pollen filter screws it windscreen top where the side of the car joins the roof panel.
Biglad2222
Member
- Posts
- 35
- Location
- Tayside
Hi folks have left p38 for a couple days now and first took a battery test it was 12.23 amps so tried to start but nothing on key for a cple try b4 it started with headlights on and no windows working
Biglad2222
Member
- Posts
- 35
- Location
- Tayside
Anyone near Blairgowrie with proper diagnostic software to clear faults on p38 2.5
Last edited:
