Headlight adjustment screws

Crazylurcher · Dec 26, 2012

Hi Guys,

Looking to convert my headlights to halogen as per some of the £30 kits on fleabay, I presume this is just a straight swap?

I ve also discovered that a few of my headlight adjustment screws appear to be missing and I m struggling to find any replacements, has anybody any ideas.

Cheers

1966 series 2A

aaronledwidge · Dec 26, 2012

You can buy new plastic housings for a few quid each which will renew your adjusters, just order them with the halogen conversiona and youll be away.

dominicbeesley · Dec 27, 2012

I got some new lucas ones from india off ebay. All metal and seemed a lot nicer than the placcy ones...only had them a year our so so not sure how well they'll last but seemed to be reasonably well made and had nicer adjusters

aaronledwidge · Dec 27, 2012

ah wow never seen metal ones, if you can get them go for that. saying that i guess a plastic one wont rust up. also do you ahve the series 3 style wings on your 2? as mine is a series 3.

tacr2man · Dec 27, 2012

MG NEW 7" METAL HEADLAMP BOWL & ADJUSTER SCREWS *** | eBay

Land Raver · Dec 27, 2012

Will the metal ones not eventually cause corrosion where they come into contact with the aluminium? I suppose on an original rebuild these could be preferable though

tacr2man · Dec 27, 2012

they should have a rubber gasket that goes between body and bowl HTSH

divie · Dec 27, 2012

Only downside Ive found with halogen headlamps is that ****part dipswitch/indicator assy only lasts a couple of years. Replacing mine again tomorrow and adding a relay to see if it improves life of switch. Still it seems a bit warmer than 2 Xmas ago when I changed the last one.

The Mad Hat Man · Dec 27, 2012

divie said:
Only downside Ive found with halogen headlamps is that ****part dipswitch/indicator assy only lasts a couple of years. Replacing mine again tomorrow and adding a relay to see if it improves life of switch. Still it seems a bit warmer than 2 Xmas ago when I changed the last one.

use the diagram in the FAQ section.

dominicbeesley · Dec 28, 2012

Those bowls do come with a gasket. Only thing that was wrong with them was the original grommet didn't fit the wiring hole properly. Other than that they seem to be ok

Crazylurcher · Dec 28, 2012

Ok having just had a look this afternoon, my headlights don't appear to be sat in a bowl, is that an issue?

Headlight adjustment screws

Crazylurcher

New Member

aaronledwidge

New Member

dominicbeesley

Well-Known Member

aaronledwidge

New Member

tacr2man

Well-Known Member

Land Raver

Well-Known Member

tacr2man

Well-Known Member

divie

Well-Known Member

The Mad Hat Man

Well-Known Member

dominicbeesley

Well-Known Member

Crazylurcher

New Member

Similar threads