headlamp bowl

nah, cos i cant be arsed with all that joining ****

yella disco said:

nah, cos i cant be arsed with all that joining ****

Click to expand...

Aaaah!!

I thought it wer cos yer **** do joined up writin

ffs mondo yer dint do that joined up writin **** on a puter

i got 1 plastic 1 and the others rotten as hell n hld in with mastic atm but when i replaced the sealed unit in the plasctic 1 there wernt no spring n i didnt have a fukin clue what i was dooin so took a look at another series behing the lights n just bodged a bracket fur the spring and it stays in there now

i just tried to go on paddocks website but the fooker is down, i'll ring em tomorrow ;0

Er Yella you got this sorted ? If not I'll have a look at ones in the back of the IIa

still not sorted, have a look if yer got one,

If I'm understanding yer jabberin right, I think I've got just what you're looking for. Get your arris round here and have a gander

i'll call round at about half eightish

get a ferkin plastic bowl , cheap as chips , easy to adjust and wont ever ever rust.

ffs nob end, it aint the bowl its the bit between the bowl and the sealed beam

aye but yer not listnin , you dunt ferkin need one if you use a plastic bowl.
plastic bowl = 6 quid odds
seating rim = 18 quid if yer lucky.

its called a seating rim and the part numbers 27H6481L

ah the ring thing that goes round the sealed beam thingey am i right ??

this is the plastic bowl , see , no seating rim.

so how the **** does the headlight hold in

No Nails?

ffs on the latest light units they have done away with the inner bowl that was held in with the spring and the 2 adjusters and then the light unit was kept in place by an outer ring fastened with 3 screws around the edge, now they only have a seat (held in place by aim adjusters) for the lamp to sit on and then outer rim to clamp it in by 3 screws.

ah, why dint yer just say that

your 'so last year' yeller.