Hello all, having now fixed my starter motor issue i have now noticed that my hill descent control doesnt work. everything engages fine and all the lights are good but when i actually descend the hill there is no resistance and just a winding/ wirring noise as i free ride down. any ideas? im not sure if it is connected but i sometimes get the traction control coming on making the same noise when i pull away from a junction. doesnt sound too good. any advice appreciated
HDC doesnt work
- Thread starter tomoldboy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 44,865
- Location
- Hornchurch
sounds like its working then.HDC and Tc are the same system doing the same thing in reverse order if you see wot i mean
Are you 100% sure it is not working?
Was it working before you did the Starter Motor?
Have you been in another Disco and experienced it working?
If the Brakes are working and its is making the right noises ie the Actuator working then i would have thought it is working.
Was it working before you did the Starter Motor?
Have you been in another Disco and experienced it working?
If the Brakes are working and its is making the right noises ie the Actuator working then i would have thought it is working.
Last edited:
Pawl
Well-Known Member
- Posts
- 568
- Location
- West Midlands, UK
Were you in low range ?
It doesn't work in high range & in low range limits to a different speed in each gear. But the fact that you could hear the ABS pump making a noise suggests it is working & you were in low range I think.
Paul
It doesn't work in high range & in low range limits to a different speed in each gear. But the fact that you could hear the ABS pump making a noise suggests it is working & you were in low range I think.
Paul
sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
just confirm is the green HDC light on and no audible warning
