hazard switch

GEEZEER

Member

Posts

28

Location

lowestoft

• Dec 23, 2015

• #1

Hi all my first post so here goes i have a freelander 1 td4 hse 54 plate what i need to know is when the hazard warning switch is on is the red triangle flash plus the seatbelt light should that light up when ignition is switched on

 

T

td4van

Well-Known Member

Posts

1,566

Location

Gloucestershire

• Dec 23, 2015

• #2

Hi the seatbelt light isn't used on UK spec Freelander 1

As for the hazard switch it should illuminate when sidelights are on but the only flash to my knowledge is on the dash

 

stannswhite

Well-Known Member

Posts

622

Location

leeds

• Dec 24, 2015

• #3

GEEZEER said:

Hi all my first post so here goes i have a freelander 1 td4 hse 54 plate what i need to know is when the hazard warning switch is on is the red triangle flash plus the seatbelt light should that light up when ignition is switched on

Click to expand...

try fastening the seat belt,it should go off,the
hazard warning light does flash in time with
the indicators.

 

GEEZEER

Member

Posts

28

Location

lowestoft

• Dec 24, 2015

• #4

thanks for replies most helpful i dont see the point putting a seat belt icon and not use it and i have to say to myselff is it worth paying £40 for a new hazard switch just to flash when on

 

stannswhite

Well-Known Member

Posts

622

Location

leeds

• Dec 24, 2015

• #5

i dont know if its an M.O.T fail/advisory if the dash
triangle does not light up,but i would also not bother
with it as long as all the indicators flash when on.

 

Dougden

Active Member

Posts

440

Location

North Kent

• Dec 26, 2015

• #6

I am with TD4Van on this. On the facelift, the switch should be illuminated but not flash. Just the lights on the dash will flash in time with the clicking. Don't waste your money buying a new switch, as it is unlikely to change what you have now.