Hawkeye BCU problem

B

Babelman

New Member

Posts

7

• Jul 17, 2013

• #1

Have fitted new fuse box as old one full of water.When I switch ignition on get audible beeping and a flashing m and s light and a flashing B with a line through it.Car will not start and no windows open or central locking. The Hawkeye works OK except does not see the BCU, keeps asking to check connections etc. I am totally baffled by this any help please, would the EKA code help??

 

B

Babelman

New Member

Posts

7

• Jul 17, 2013

• #2

have tried entering EKA code 6 times, vehicle does not seem to respond to the key actions BCU knackered ??

 

Last edited: Jul 18, 2013

B

Babelman

New Member

Posts

7

• Jul 18, 2013

• #3

managed to get Hawkeye to connect to BCU but can't view EKA all can do is unable/disable.Can't clear the flashing B and m and s warning lights

 

defcrazy

Active Member

Posts

477

Location

Trinidad & Tobago

• Aug 22, 2013

• #4

Babelman said:

managed to get Hawkeye to connect to BCU but can't view EKA all can do is unable/disable.Can't clear the flashing B and m and s warning lights

Click to expand...

how did you get it to connect because im having the same problem ?

 

B

Babelman

New Member

Posts

7

• Oct 11, 2013

• #5

I found if I closed the drivers door it would connect, had to replace the BCU as it was faulty. HTH Just need to set the plips now others wise all fine