Has anyone used a britpart drop arm?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
owas

owas

Well-Known Member
Posts
1,213
4 bolt box,
Did it fit ok in terms of the splines?

Reason i ask, ive been trying to find out why my steering is loose (about to just give up and give it to a garage and let them sort it)
And my neighbours friend who happens to have restored a few had a look, and said he can see there seems to be a small amount of play in the drop arm itself but everything else looks solid.

Would make sense as it was perfect with the old manual box and hasnt quite been right since i swapped over to power steering.
 
ive fitted quite a few all have been ok, it could depend on whether your manual was gemmer or adwest , or could be poor box splines or the drop arm itself, are you fully tightening it
 
It tightend up to torque, but looking at the other box i have that still has the drop arm on, its looks as if its not on the spline as far up, about 4/5mm between the drop arm and the box, it wouldnt go any further up.
 
owas said:
It tightend up to torque, but looking at the other box i have that still has the drop arm on, its looks as if its not on the spline as far up, about 4/5mm between the drop arm and the box, it wouldnt go any further up.
Click to expand...
5mm below bottom of the box would seem about right or more
 
jamesmartin said:
5mm below bottom of the box would seem about right or more
Click to expand...

Sorry i meant from the edge of the seal to the drop arm, practicaly no gap on my old one.
 

Attachments

  • 20171026_232130.jpg
    20171026_232130.jpg
    178.4 KB · Views: 170
jamesmartin said:
there is a gap but not as much as normally youd find, though without seeing your other drop arm fit its hard to say whether its abnormal
Click to expand...

Not letting me upload the the second pic on here,

20171026_232633.jpg
 
Last edited:
If the nut is kin tight I wouldnt worry about it, I fitted the britpart one with a G on the end of the part number about 3 years ago and it hasnt fell off yet!
 
lynall said:
If the nut is kin tight I wouldnt worry about it, I fitted the britpart one with a G on the end of the part number about 3 years ago and it hasnt fell off yet!
Click to expand...


. I think loose steering is indeed something to worry about.
 
  • Like
Reactions: 8ha
I fitted a Discovery (Paddocks/Britpart) drop arm to my 90 4 years ago ... far better steering than the goose neck thing and way easier to change a worn joint, and still going well.
 
You can see how loose the radius arm nut was :oops:
 

Attachments

  • 20171104_133641.jpg
    20171104_133641.jpg
    197.6 KB · Views: 108
Just to conclude my steering issues,
The recon box i put on was causing the rest of my odd feeling steering, as i turn it while its off now it feels notchy. I put my old one back on and its back to being as good as a defender can be now. :D
 
owas said:
Just to conclude my steering issues,
The recon box i put on was causing the rest of my odd feeling steering, as i turn it while its off now it feels notchy. I put my old one back on and its back to being as good as a defender can be now. :D
Click to expand...

So maybe I missed it, but if the old box was good , why did you change it? plus where did you get the recon from?

Chers
 
You must log in or register to reply here.

Similar threads

the murfster
Defender drop arm
Replies
6
Views
864
the murfster
the murfster
T
Spongy(?) Steering
Replies
1
Views
258
tottot
tottot
1
Steering / suspension ideas
Replies
16
Views
1K
110Matty
1
Speedex750
Defender TD5 steering box oil leak - not from the steering arm?
Replies
1
Views
740
Def90man
Def90man
dag019
Drop arm ball joint puller
2
Replies
32
Views
4K
KISSMYAURA
KISSMYAURA
Back
Top