Has anybody got one of these?

Glyn D · Dec 8, 2018

I was cleaning out the injectors on my 300tdi today and one of the small brass(?) washers/spacers pinged off and disappeared into the ether somewhere. Does anybody have a spare or know where I can get one? Haven't been able to find a part number and I don't want to fork out for a whole injector.
View attachment 164245

neilly · Dec 8, 2018

So the washer is from the inside of the injector?

Cheers

Glyn D · Dec 8, 2018

That's correct

neilly · Dec 8, 2018

OK, then try giving one of the injector refurbishers a call.

Most have the stuff on the shelf.

Try these, I have used them in the past, good service.

https://www.bobbeckfuelinjection.co.uk/

Cheers

Rougharse Racing · Dec 8, 2018

If you have had the injectors out you really need to replace all four washers to get a good seal.
If you have lost one, have a good look down the hole to make sure it isn't stuck at the bottom.
You can get stuck seals out using a round file to grip the inside of the washer.
If you do not seal the injectors properly you will get blow-by, which may damage the head, cause the injector to become stuck in the head and may allow conbustion fumes into the engine bay and possibly the cab and your lungs.
https://www.paddockspares.com/err46...MIvNXO_sWQ3wIV7ZztCh31cggfEAQYAiABEgJJr_D_BwE

neilly · Dec 8, 2018

Rougharse Racing said:
If you have had the injectors out you really need to replace all four washers to get a good seal.
If you have lost one, have a good look down the hole to make sure it isn't stuck at the bottom.
You can get stuck seals out using a round file to grip the inside of the washer.
If you do not seal the injectors properly you will get blow-by, which may damage the head, cause the injector to become stuck in the head and may allow conbustion fumes into the engine bay and possibly the cab and your lungs.
https://www.paddockspares.com/err46...MIvNXO_sWQ3wIV7ZztCh31cggfEAQYAiABEgJJr_D_BwE

I think he is saying the washer is an internal washer from the injector. not a sealing washer.?????

Cheers

Rougharse Racing · Dec 8, 2018

In that case he may need to save up for a set of injectors, I don't think they respond well to tinkering, however I will happily be proved wrong.

Sirronluap · Dec 8, 2018

Linker for example.....

Kwakerman · Dec 8, 2018

I think the washers inside the injector can be different thicknesses and are swapped around to set the needle lift (pop) pressure. If that is correct and you don't know what was in there to start with then it may be worth sending it off to get it set up correctly

Has anybody got one of these?

Glyn D

Active Member

neilly

Well-Known Member

Glyn D

Active Member

neilly

Well-Known Member

Rougharse Racing

Well-Known Member

neilly

Well-Known Member

Rougharse Racing

Well-Known Member

Sirronluap

Active Member

Kwakerman

Well-Known Member

Similar threads