H11 lamp connector replacement.

MonkeyLander

Member

Posts

33

Location

Prescot

• Sep 14, 2024

• #1

I've just changed the lamps in my FL2. Both the H7 and H11.

However on one of the H11 seems to had burn out at some point.
It still works but I would like to replace it.
Can such connector still be had?

 

Nodge68

Well-Known Member

Posts

32,974

Location

Cornwall

• Sep 15, 2024

• #2

Take the moulding number off the other side, and do a Google search to see if anything comes up. It's likely that it is available somewhere, but you'll need to do some digging.

 

GrumpyGel

Well-Known Member

Posts

26,525

Location

Christchurch, New Zealand

• Sep 15, 2024

• #3

Breakers yards. I dunno anything about that part, but obviously off an F2 or maybe a 2010 era Ford or possibly other cars might use that as its possibly a Chinese parts bin part.

 

MonkeyLander

Member

Posts

33

Location

Prescot

• Sep 15, 2024

• #4

So I have found them and they come pre wired so I'd have to cut the current cable and solder in.

Thing that concerns me is the new one only have 2 wires whereas mine has 3.

 

Nodge68

Well-Known Member

Posts

32,974

Location

Cornwall

• Sep 15, 2024

• #5

MonkeyLander said:

So I have found them and they come pre wired so I'd have to cut the current cable and solder in.

Thing that concerns me is the new one only have 2 wires whereas mine has 3.

Click to expand...

The 2 wires are probably on the ground side, where it connects to the other bulb in the assembly. Just join the 2 wires together, as they are now.