Grinding noise

C

CHRIS HILL

Active Member

Posts

111

Location

CHESTERFIELD

• Aug 7, 2021

• #1

Hello. Ive got a discovery 2. Theres a loud grinding noise coming from front wheel. Replaced discs and pads as they were worn. Still had same noise. Removed hub. Felt ok when turning. Split hub to check bearings. They apear to be ok. Has any body got any ideas? Was going to clean hub bearings and reassmble with new grease and refit before buying new parts. Thankd

 

Stanleysteamer

Well-Known Member

Full Member

Posts

45,163

Location

East Dorset

• Aug 7, 2021

• #2

1/ CV joint?
2/ replace whole hub, tis easier and more likely to last. and less of a pain when it comes to the reluctor ring and sensor.

In fact I'm a bit surprised that you managed to split the hub etc.
Best of luck

 

T

TheMunster

Active Member

Posts

360

• Aug 8, 2021

• #3

Yeah you need to replace that hub, the crush spacers can only be torqued down once, the bearings will die quickly.

 

C

CHRIS HILL

Active Member

Posts

111

Location

CHESTERFIELD

• Aug 8, 2021

• #4

Hello. Thanks for the replies. Hub pressed apart quite easily. Ii looks like anew hub is needed. I hope this sorts out grinding noise. Im not convinced the hub is at fault.