Greenlaning nr Guildford?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
:hijacked:
Sorry folks, wondered if anyone local here is going to the Bristol and West show and would be prepared to take a PC to the show to pass on to Fanatic?

I can pop it over to you locally if you are... :)

:focus:
 
I discovered when i got home that a small stone had got lodged inbetween the tyre and the wheel rim and was leaking air, i thought no problem i will put the spare on, that was flat too so i pumped it up as it had been on there a while, next day that was flat too! so now i have two flat wheels lol, luckily i nicked two of the wheels off the other disco i bought, very handy lol
Anyway whens the next outing folks ?
 
I should be able to plan something up at some point. I've been slammed with work the last few weeks, and trying to get this 110 up and running. Working on it this weekend then MOT next week at some point....
Need to break it in on the lanes. heh
 
I should be able to plan something up at some point. I've been slammed with work the last few weeks, and trying to get this 110 up and running. Working on it this weekend then MOT next week at some point....
Need to break it in on the lanes. heh
What have you needed to do to it Paul ?
 
.... well as always with these things it looks ok until you start digging around.
So far I've got the engine running, new points leads plugs. Then found one of the carbs was flooding because the float was full of fuel so I've now rebuilt both carbs. Replaced all the lights, all were corroded and not working 100%.
Replaced the rear seatbox cross member. Welded up various parts of the chassis after the screw driver went straight through them. Replaced a few split radius arm bushes. Un- seized the brakes. Replaced diff and gearbox fluids. Or rather filled the gearbox as it had no oil in it (thought it sounded noisy on start up).
Sorted out a leaking hub seal. Hmmm I'm sure there's more hehe.
Should be ready for MOT after this weekend. I've just got to get carbs back on and tuned. Weld up one of the out riggers, replace an exhaust mount and a fuel line and I should be ready to go.
 
Back
Top