I need some rot putting right on my chassis, but I dont want a sheet of metal tacked on then beaten with a hammer so it bends and covers the rot then welded to the chassis, I need the rear half of the middle rails bottom repairing by cutting out the bottom of the rail and welding a new section in there, anybody know a good fabricator in Suffolk who can do this?
Good welder in Suffolk?
- Thread starter nobber
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Without wishing to sound like wolf... whereabouts in Suffolk is Arse?
livers
Well-Known Member
- Posts
- 3,906
- Location
- suffolk A12/A14 junction
Always thought Arse was 10 miles N of Bury
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
I'm about 10 miles West of Bury St Edmunds in Arse-Upon Toilet
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
Peter Norfolk in Acton nera sudbury is trustworthy imho.
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Not me, I had someone in mind though and made a couple of calls today only to find that he died a year ago in a bike smash, sorry
hamish123
New Member
- Posts
- 46
- Location
- kings lynn norfolk
Have a google for fabrication firms in your area as must be several general engineering ones about , and most will be far better than most garages .
Not me, I had someone in mind though and made a couple of calls today only to find that he died a year ago in a bike smash, sorry
No worries , thanks for taking the time out to do that though, its much appreciated.
I'll do that fella, thanks.
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
He runs a garage under that name in Acton. Knows his Landys and can weld. There is also Demand Engineering 01473 890820, bloody good although they work mainly in stainless.
I have a garage local to me who restores Triumph cars so I've dropped them an EMail so with a bit of luck they might be able to help.
There is Roach Jaguar down your way who seem like they might be able to do it, I have a feeling though a restoration place might be a tad costly , but you never know.
There is Roach Jaguar down your way who seem like they might be able to do it, I have a feeling though a restoration place might be a tad costly , but you never know.
- Posts
- 1,824
- Location
- In the middle, somewhat elevated
By trustworthy, I didn't mean that you could trust him not to pinch the small change under the seat (although he wouldn't do that either), but that you could trust him to do a good job:doh:
That's all right, don't mention it.
goldypurple
Active Member
- Posts
- 206
- Location
- Weeting, Norfolk
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
Wicken 4WD will do an awesome job of it but I thought you wanted a bloke with a welder to do it cheaply..
JordanTD5
Active Member
- Posts
- 262
- Location
- Ipswich, Suffolk or Dorking, Surrey
Buddy of mine Ronnie Court is just the other side of Ipswich from you. (I'm near stowmarket).
He's not in the trade anymore but is very experienced and good at what he does. Still does a lot of work on the side for various people including myself.
He's not in the trade anymore but is very experienced and good at what he does. Still does a lot of work on the side for various people including myself.
livers
Well-Known Member
- Posts
- 3,906
- Location
- suffolk A12/A14 junction
OK I will come out of retirement just for you £250+ vat for a quote, you must be specific about what you want though, might have to bring trapper across for a second opinion:high5:
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
Evergreen garage near Stonham Aspall will do a great job also a guy called Phil in the same area looks after my landy and my old mans. Both have done excellent work for me in the past.
If either of those options is useful to you I can send you details
If either of those options is useful to you I can send you details
Similar threads
