gearbox

B

blacklandyone

New Member

Posts

20

Location

sheffield

• Dec 23, 2013

• #1

hi there, this is my first freelander, i got this 4x4 with a clutch prob, having taking the gearbox out i find the shaft that the bearing goes on to be stuck and will only move by puttin a bar on it there the arm to move it, will i need a new gearbox or can it be fixed ?

 

Freelaner

Landy Driver

Posts

24,848

Location

Yorkshire

• Dec 23, 2013

• #2

clutch release arm - MG-Rover.org Forums

this may help

 

Nodge68

Well-Known Member

Posts

32,848

Location

Cornwall

• Dec 23, 2013

• #3

I'm guessing it's a PG1 box. The clutch release lever is seized. Free if of with some kind of penatrating fluid. Once it free remove the fork and wiggle the shaft out. Clean it with wire wool. Lubricate with CV joint grease and refit. Then replace the clutch bearing and refit the box.

 

B

blacklandyone

New Member

Posts

20

Location

sheffield

• Dec 23, 2013

• #4

thanks, will have a try lol

 

J

Jonty1

New Member

Posts

90

• Dec 24, 2013

• #5

Mike Satur does a modded clutch release arm for the pg1 box, it's drilled and fitted with a grease nipple - you should be able to find details on the MGRover forum. Stops the seizure problem. Might be worth looking at ??

 

B

blacklandyone

New Member

Posts

20

Location

sheffield

• Dec 24, 2013

• #6

Jonty1 said:

Mike Satur does a modded clutch release arm for the pg1 box, it's drilled and fitted with a grease nipple - you should be able to find details on the MGRover forum. Stops the seizure problem. Might be worth looking at ??

Click to expand...

Thanks will look into that. Do you know where abouts he is plz ?

 

Freelaner

Landy Driver

Posts

24,848

Location

Yorkshire

• Dec 24, 2013

• #7

MGF MG F Uprated Clutch Release Lever Arm PG1 Gearbox Brand New | eBay