Gearbox R280 turret spring and roll pin

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
REEVSY said:
It would seem Ashcrofts Fave the turret but not the spring and roll pin but i will ring on Mon and see what they say? Thanks!
Click to expand...
REEVSY said:
It would seem Ashcrofts Have the turret but not the spring and roll pin but i will ring on Mon and see what they say? Thanks!
Click to expand...
A978EE9F-6764-446C-8BD6-F25C382867C6.jpeg


this is the complete unit
 
That’s great, I was in the process of fitting a Slickshift however the turret was very worn in the spring housing Area so in for a penny in for a pound, it made very little difference to the stick movement when adjusting the bios spring, the ware is so bad.
 
The bias spring is only there to position the stick (at rest) to be aligned with the 3rd/4th gear gate.
If your turret is worn so the stick is 'sloppy' when in gear, fitting a new one will help cure that. Bias springs and pins aren't expensive but I'd be surprised that the originals are worn ....

Got any pictures ?
 
miktdish said:
The bias spring is only there to position the stick (at rest) to be aligned with the 3rd/4th gear gate.
If your turret is worn so the stick is 'sloppy' when in gear, fitting a new one will help cure that. Bias springs and pins aren't expensive but I'd be surprised that the originals are worn ....

Got any pictures ?
Click to expand...
Thanks I’m getting the slick stick kit on Mon. It’s only a quick job so will see what it’s like When fitted then decide if I should change the turret.
 
You must log in or register to reply here.

Similar threads

T
Rear spring stuck in upper seat
Replies
12
Views
494
Twinnie
T
Rusty Bucket
Bottom swivel pin bolt torque
Replies
2
Views
436
tottot
tottot
Mooky
Swivel pin oil change.
Replies
11
Views
622
Mooky
Mooky
N
LOF spring and pedal sticking to the floor
Replies
3
Views
1K
NdG1977
N
lightning
Value me this 110
Replies
14
Views
659
lightning
lightning
Back
Top