gearbox help please
- Thread starter ozzz
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
auto?
if so the shift points are differnt on 3.5 and 3.9 and not sure if that can be changed easily
jamesmartin will probably know
if so the shift points are differnt on 3.5 and 3.9 and not sure if that can be changed easily
jamesmartin will probably know
West Slope Rover
Well-Known Member
- Posts
- 8,617
- Location
- deep underground
Do you know if the shift points are the same on the 3.9 and 4.2?
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
i do not as only asked ashcrofts about a 3.5 box I had when I had a 3.9 to put it in 
fett
Well-Known Member
- Posts
- 8,637
- Location
- South Hampshire
So what exactly is the problem?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
swap valve blocks
West Slope Rover
Well-Known Member
- Posts
- 8,617
- Location
- deep underground
Thank you Mr. Martin.
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
You can either use a series v8 conversion plate or use a different bellhousing from a v8 box I believe? As for input shafts and clutches etc James Martin is your man again
