Gearbox Help and Engine ideas

Your rear prop will be tiny! Be warned you'll also need to go wide angle……I've taken this one step further and I'm building a whole new rear axle using a Jaguar rear end with PowerLock diff or planning to anyway!
Been offered one in the right ratio now for £250

Gearbox mounts I'll take pics for you tomorrow and show you how its done as I'm using LT77 mounts for my LT230 and R380 combo they just unbolt but I welded them into the series

More than 12 hours work believe me……you'll also need to modify the handbrake position as the LT230 will foul it, sort speedo drive gear, getting the engine in will be be a pain and if you've bought the disco with plans to use the gearbox I've got bad news for you…..

No I have a defender gear box with the short housing. I am using the mounts for the box from the disco they unbolt. The front grill is from a defender to I have the extra space upfront.

The standard prop that is on there just about fits, might get a slightly shorter one just to be safe.

really busy with spud harvest at the moment so cannot get to much done. Handbrake not a problem, Ill just figure something out.

The chassis is from an old range rover classic that was bobtailed.