Gearbox filling plug rounded
- Thread starter gazdon
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Stilsons?
I did try but sump in the way catching the stilsons
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Don’t ask me 
I got the spare off Alan and I’ve delegated it the Indy, I just made it worse
I got the spare off Alan and I’ve delegated it the Indy, I just made it worse
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Hammer and chisel if all else fails
- Posts
- 4,653
- Location
- Rotherham
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
You buggered up a T55 plug Jack I think this is an ordinary hex plug that has been rounded off.Don’t ask me
I got the spare off Alan and I’ve delegated it the Indy, I just made it worse
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
when my hammer and chisel fail
I’m out of options.
Problem is the plug is such a weak metal and internal itd sooner mash than move. Think I put locktite on it when it went in
I’m out of options.
Problem is the plug is such a weak metal and internal itd sooner mash than move. Think I put locktite on it when it went in
- Posts
- 4,653
- Location
- Rotherham
Me thinks a gasket sealant yes a loctite nowhen my hammer and chisel fail
I’m out of options.
Problem is the plug is such a weak metal and internal itd sooner mash than move. Think I put locktite on it when it went in
oops
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Filled for life
Filled for life
Never the case with LR. It always finds a way out lol.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
Is why I need it out before it dies
Is why I need it out before it dies
Have you got an oversized torx or allen bit? Maybe access to a welder to tack a nut on?
kds
Well-Known Member
- Posts
- 2,262
- Location
- old,ugly, tired in Lincoln.
Had to use a chisel to move mine, made sure didnt over do it when put it back had to order new one from poland (well somewhere over the water) something like £16 it was also bought a 17mm single hex ring spanner to fit new one with a normal multi point ring is too loose a fit and rounds plug off . It has to be spanner job not a socket because there not enough room between prop shaft and gearbox for one.
- Posts
- 12,628
- Location
- Sud ouest France !
Drop the front prop and give yourself more room. Then get some good molegrips and get a really good bite on the plug. So you can only just close the molegrips and it'll shift. It's a soft as shïte the plug so the molegrips can sink there teeth in nicely. If not then hammer and chisel would be next.
Last edited:
BillyboysLad
Member
- Posts
- 39
- Location
- Southport, Merseyside
Did BMW/GM just use random bolts from the parts bin? I did my gearbox (Td6) last weekend and the filler plug was a countersunk T50, a badly chewed one and so tight that I was gung ho in the end, convinced I would have to drop the gearbox, but without warning and with a grazed couple of knuckles it finally gave way. I was mighty relieved, good luck with the mole grips
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Reminds me of an R380 box that had a stripped filler plug, ended up filling the box through where the shifter goes.
Bloody farce!
Bloody farce!
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
RangeRoller dt
Well-Sprung Member
- Posts
- 14,393
- Location
- Trapped inside my head @ LZ asylum
T55 is betterer....I would imagine
Similar threads
