Gear selector Ucb000051

BollieB · 2025-01-24T10:02:14+0000

Hi I hope someone may have some ideas for me.

The gear selector part no Ucb000051 is supposedly faulty on my Range Rover 2004 petrol.

You cannot buy this gear selector new anymore and so need to fit a second hand one does anyone know if these are coded to the original vehicle and need to be re coded …… we have fitted a second hand one and this has not solved the problem.

The original problem was when selecting a gear drive or reverse the selected gear would clunk in putting the car into limp mode.

Any information gratefully received.

kermit_rr · 2025-01-24T10:50:17+0000

i'm no expert but i would have thought a clunk wouldnt be a result of the gear selector

kermit_rr · 2025-01-24T10:55:58+0000

What error codes do you have?

BollieB · 2025-01-24T11:27:46+0000

Hi the code came up as the gear selector the Landrover guy who fitted the second hand one normally fits new but Landrover no longer make the part

Bemble · 2025-01-24T16:10:39+0000

This doesn’t sound right. Are you sure that something else (e.g. the inhibitor switch) isn’t putting the transmission into failsafe when the gear lever is moved? Once in failsafe the mains pressure is not modulated which causes the gear engagement from Park or Neutral to go in with a bang. As kermit_rr has suggested, I would get the codes read and see if P0705 has been flagged.

Phil

Mark Piercy · 2025-01-24T17:39:40+0000

BollieB said:
Hi the code came up as the gear selector the Landrover guy who fitted the second hand one normally fits new but Landrover no longer make the part

It may also require adjustment through wear?

badfluffy · 2025-01-24T18:41:41+0000

if you mean the gear leaver no its not coded, nore is the selector in the gear box or the valve block

Gear selector Ucb000051

BollieB

New Member

kermit_rr

Very

kermit_rr

Very

BollieB

New Member

Bemble

Well-Known Member

Mark Piercy

Well fumbled member....

badfluffy

Well-Known Member

Similar threads