Series 3 Gear box

Mally T

Member

Posts

46

Location

North Wales

• Sep 12, 2021

• #1

Hi all,

I have just rebuilt my S3 gear box;

*Whilst driving*
The reverse, 3rd & 4th gear work fine, however 1st & 2nd gear is very stiff. I have put on a new 1st & 2nd synchro and 1st & 2nd synchro rings, it'll go into gear, but it takes some force;

So, does it just needs wearing in??
Any thoughts would be greatly appreciated, thanks!

Mal

*edited/updated post*

 

Last edited: Sep 15, 2021

W

Wildefalcon

Well-Known Member

Posts

1,669

• Sep 13, 2021

• #2

It's this on the bench, or driving?

 

Mally T

Member

Posts

46

Location

North Wales

• Sep 13, 2021

• #3

Sorry forgot to say, it's driving

 

steve2286w

Well-Known Member

Posts

4,523

Location

monkeyangerland

• Sep 16, 2021

• #4

If you have a search on here May find a few answers here’s one of them
https://www.landyzone.co.uk/land-rover/stiff-gear-selection.283304/

When I did mine I recall a needle bearing in a housing that was easy to damage when inserting the gearbox shafts
As in post above try removing top cover to inspect/ test

 

Mally T

Member

Posts

46

Location

North Wales

• Sep 16, 2021

• #5

Thanks, Steve, that is really helpful, I will do what Landy 61 advised and
loosen the top off and let you know, cheers