Galvanised chassis where to go for one?
- Thread starter 90maniac
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
OxonLandy
Active Member
- Posts
- 574
- Location
- nr Abingdon, Oxon
Richards?
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
Boris113
Well-Known Member
- Posts
- 1,356
I'm really pleased with my Richards chassis- would definitely use them again.
OxonLandy
Active Member
- Posts
- 574
- Location
- nr Abingdon, Oxon
shiny shiny 
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Richards or marslands, I went for marslands on a rebuild I did but that's because there was a 6 week waiting list for the chassis I wanted and marslands had it in stock. Plus they're half an hour away from me
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Theres also places like designa
td5tool
New Member
- Posts
- 358
- Location
- Huddersfield
I can only comment on marslands as that's all I've used, but can't complain and the bulkheads don't need much shimming I've found
defender greg 90
New Member
- Posts
- 33
- Location
- aberdeen scotland
i went for marslands ordered it on monday afternoon ans was up in scotland on wednesday morning, very good quality and the also come with a gear box xmember unlike a richards which is another £100 plus VAT
Certainly do
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Worth considering talking to pressbrake
He was talking about making some chassis. On the basis his crossmembers are rock solid worth a thought.
He was talking about making some chassis. On the basis his crossmembers are rock solid worth a thought.
paddy700d
Active Member
- Posts
- 293
[/URL]
I presume I'm not the only one that gets a tingling feeling in my special place from that photo
Lol
As and when I need a galv chassis it'll be a Richards.
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
If he made it out of 6 mm like the crossmembers they'd never rust away
bit heavy though 
AlbertDefender90
Active Member
- Posts
- 955
- Location
- Ellesmere, Shropshire
I went for a marshland chassis, really happy with it and it was about £500 cheaper with all the extra mods than a richards chassis.
I presume I'm not the only one that gets a tingling feeling in my special place from that photo
Lol
As and when I need a galv chassis it'll be a Richards.
You certainly arn't lol i like the thickness of richards chassis through out lol the marshland is only in a few parts
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
