- Posts
- 83,282
- Location
- Embasinga stocæ
Anyone know what the size is of the gaiter fitted to the rear AR bar drop link?
Disco 1 gaiter size
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
? Photo
Jamiegreen
Well-Known Member
- Posts
- 628
- Location
- Wales
Dunno but I do know a drop link is about 8 quid 
- Posts
- 83,282
- Location
- Embasinga stocæ
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
- Posts
- 83,282
- Location
- Embasinga stocæ
and the £5 carriage..
- Posts
- 83,282
- Location
- Embasinga stocæ
carnt someone wrap a bit of string around one and tell me the circumference?
discool
Well-Known Member
- Posts
- 13,609
Don’t hold your breath, D1s don’t have them according to the LR parts book
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
You just want the size of the rubber bit?
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
- Posts
- 83,282
- Location
- Embasinga stocæ
yes - so i can get a new boot
Gazbo
Well-Known Member
- Posts
- 3,949
Neither of mine, (the first one I had and the one I have now), had them on, especially after I removed the arb's, front and rear.
Bars are hanging on the wall in the workshop, useless as a "hip pocket" in a singlet.
Do you just want the gaiter mounting surface diameter on the ball socket bit, the diameter at the ball pin bit, and roughly the length?
- Posts
- 83,282
- Location
- Embasinga stocæ
that would be hunky dory, ta xxx
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Can you buy just those rubbers then ?
- Posts
- 83,282
- Location
- Embasinga stocæ
- Posts
- 83,282
- Location
- Embasinga stocæ
Chrisw8
Well-Known Member
- Posts
- 1,980
- Location
- Top of the Hill
Aha
Gazbo
Well-Known Member
- Posts
- 3,949
MHM.
Gaiter Large mounting diameter 32mm (ball socket end). Groove is 3mm wide.
Gaiter Small inside diameter 17.5mm (ball pin end).
Length from outside ball socket groove to start of taper on pin 22mm.
Also looks like on mine front and rear arb links are same.
Measurements supplied are from the rear links.
Jamiegreen
Well-Known Member
- Posts
- 628
- Location
- Wales
Ah.. thats what I was thinking when I said about £7, forgot not everyone lives near a bearmachJust up the road from me
