Fuse 10 Failure

Hi,
I have a fuse 10 failure fault code, the problem is that fuse 10 has not blown and I do not have any of the functions on my p38 that fuse 10 would control i.e. heated seats etc. I have had it fault diagnosed and that was clear and therefor no fault clearance was possible. has anyone got any suggestions for this irritating "non" fault that shows every time you switch on the ignition and of course when you turn it off.

Cheers
Bob

Hi bob i have had the same problem for past 2 years and like you all is ok and the functions for fuse 10 work ok i just ignore the fault code but hopefully somebody will sort out the problem for us . sean

Faulty engine bay or Becm fusebox is a likely suspect for spurious fuse failure messages. Have a lok/sniff for clues.

Same problem here i have spoken to someone who knows and they think it could be a broken wire witch could make sense but i'm yet to find out, will keep you up dated as i will be having this problem solved.