Fuk sake...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pos

pos

Well-Known Member
Posts
3,685
Location
West Yorkshire
Hello,

I've thought for the past couple of days that my 2.5 N/A smelt a little fumy inside, but today my back box has decided to part from the long middle pipe. As far as I am ware, my 2.5 N/A does not have any form of CAT converter, just two silencer boxes? So technically, my 90 should get through its MOT emissions wise even with just a straight down exhaust? I am not one for understanding exhausts and what I am and am not allowed so I would like a little advice please!

1) Do I have to have the back box, or could I do away with the whole thing and have a straight down exhaust that exits under the passenger door with just a single box?

1) How much would it cost me to have a new bit of pipe fitted, starting at the back box, finishing above my rear mud flap?

2) Where can I buy cheap exhaust parts?

3) Are there any other options!?

Looks like a bad day for exhausts http://www.landyzone.co.uk/lz/f7/mid-box-replacment-56073.html,

NOTE: I've just had a look on Paddocks, and they're **** cheap. Looks like they just bolt together without any welding too, is that right?

Thanks in advance for any help / advice!
-Pos
 
lookin at the diagram on the first link, is it NRC8889 that is broken? if so get that!

i dont know what the second link is , looks like its just the tailpipe without a built in silencer.
 
itl come with a couple of metal hooks on it which are a tight fit but will fit into the rubber supporters (i dont know the proper name?>!) that hang off your chassis/ rear crossmember
 
New exhaust rubbers are dirt cheap and they will allow some movement, which stops the exhaust from flexing on the welds and breaking prematurely.
 
pos said:
All of those have dropped off on mine, so I have to make do with lots of washers! Thanks again :)
Click to expand...


Dude. Call them up and give them your chassis number. Then they will make sure you get the right parts. Also ask them for all the parts you need i.e. rubbers/clamp. They are dirt cheap. If you dont used the rubbers your landy will vibrate like fook!!:eek:
 
Boxer said:
New exhaust rubbers are dirt cheap and they will allow some movement, which stops the exhaust from flexing on the welds and breaking prematurely.
Click to expand...

Thanks, that may be the cause of my breakage its self. The exhaust has no rubber mounts anywhere in line! It will have by the weekend mind.
 
HuN73R said:
Dude. Call them up and give them your chassis number. Then they will make sure you get the right parts. Also ask them for all the parts you need i.e. rubbers/clamp. They are dirt cheap. If you dont used the rubbers your landy will vibrate like fook!!:eek:
Click to expand...

It did vibrate like hell, but I will get it fixed!
 
You must log in or register to reply here.

Similar threads

Crunky
90 TD5 Centre box delete problems
Replies
7
Views
409
Crunky
Crunky
AH-4x4
Steering Box Leaks (NTC1582)
Replies
7
Views
435
Rangieman123
Rangieman123
I
Automatic Gearbox and hand controls.
Replies
3
Views
300
Stanleysteamer
Stanleysteamer
M
Spitting output housing from Transferbox
Replies
16
Views
497
miktdish
miktdish
H
2.5TD where to mount center exhaust bracket
Replies
10
Views
1K
dag019
dag019
Back
Top