And are they relative says go fit?
Fuel tank cradle on Fleabay
- Thread starter dfossil
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
They're held in with 4 bolts, however getting the cradle in without first unbolting the rear subframe, is basically impossible.
It took me 3 hours to replace mine, and it's a far from pleasant job.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Having done a couple it all depends on whether the front 2 bolts come out or whether, like I had to, you have to cut them, drill and retap. Be prepared for the estimate to increase if problems are found. Dropping the subframe is essential. Removing prop is essential, well the rear connection. Exhaust can be left in place, just unhook.
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Also, run tank down on fuel to reduce weight before the job and tank can then be held in place either with a jack or a ratchet strap while carrier is changed.
Similar threads
