Preheat plugs changed starts on the button but have been informed due to having the ECU remapped the fuel pump could be the problem , running lumpy and then runs ok. It was remapped nearly a year ago and was fine till preheater plug problem. Is this likely and if so can I get the fuel pump uprated, any suggestions would be gratefully appreciated.
Fuel pump
- Thread starter Bob.
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
td5 ?
markomate2
Well-Known Member
- Posts
- 899
- Location
- Bedford and Tallinn
Hi Bob!
When its running, does it idle ok? OR If left idling, for more than 10 mins, does it slowly cut out and stop?
Mark
When its running, does it idle ok? OR If left idling, for more than 10 mins, does it slowly cut out and stop?
Mark
markomate2
Well-Known Member
- Posts
- 899
- Location
- Bedford and Tallinn
Pretty much a certainty that your injector seals need changing.
Fairly easy job.
Lots of info on here and http://www.discovery2.co.uk/Injector Seals.html
Mark
Fairly easy job.
Lots of info on here and http://www.discovery2.co.uk/Injector Seals.html
Mark
