Fuel problem

oldtel · Apr 27, 2019

good afternoon everyone
Is there someone that can help me with a little problem I have with my p38 ym 2000 v8 lt
I had trouble starting and it stalled , plugged in my Hawkeye and the following codes came up- p0102 / p0174 /p0171/p0172/p0175 the first code is the maff censer which I replaced car running well but I am still getting fault codes p0174 and p0171 is this anything to worry about as it is running ok but I would like to rectify if it’s within my ability
Thanks in advance for any help
Terry

MrGorsky · Apr 27, 2019

I haqve a GEMS V8, not the THOR, but the codes are both to do with vacuum leaks and running lean according to Google.
Have you checked you've not got an air leak around the MAF? Make sure the large O ring for the MAF is seated correctly, and that all the rest is nice and tight.

oldtel · Apr 27, 2019

MrGorsky said:
I haqve a GEMS V8, not the THOR, but the codes are both to do with vacuum leaks and running lean according to Google.
Have you checked you've not got an air leak around the MAF? Make sure the large O ring for the MAF is seated correctly, and that all the rest is nice and tight.

Thanks for the reply I have not looked for a leak that’s very interesting I have thought it might be a leak but didn’t think it would be there I shall look in the morning thanks I shall let you know how I get on

Saint.V8 · Apr 27, 2019

Also check O2 sensors and wiring thereto

oldtel · Apr 28, 2019

Saint.V8 said:
Also check O2 sensors and wiring thereto

Thanks I have fitted two new ones about 5-6 years ago they were Bosch ones so I wouldn’t have thought the CO censors were shot but when I can get over the pit I shall look at the wires anything could have pulled them or even heat could damage them
Thanks for your idea
Terry

Fuel problem

oldtel

Member

MrGorsky

Well-Known Member

oldtel

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

oldtel

Member

Similar threads