It appears that I have a leak from my FIP. It looks to me like is is coming from the bolt/screw on the right in the image fairly tight against the timing chest. Does anyone know if there would be diesel behind this (I'm guessing so), and also I think the pump would need to come out to get a new washer on there?
Fuel Injection Pump leak
- Thread starter Thommo1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 11,001
- Location
- Shropshire
Long shot but have you tried nipping it up a bit?
Certainly looks like pump removal to get that out although, if not aware, you can get a kit allowing FIP removal without disturbing the timing chest.
Sure it's not coming from what looks like that Banjo?
Certainly looks like pump removal to get that out although, if not aware, you can get a kit allowing FIP removal without disturbing the timing chest.
Sure it's not coming from what looks like that Banjo?
Perfect - thanks for that. P.I.T.A. though as that's a garage job for me. lol
steve2286w
Well-Known Member
- Posts
- 4,524
- Location
- monkeyangerland
adrian hogg
Well-Known Member
- Posts
- 410
- Location
- WEST MIDLANDS
hi If its from the 13mm nut next to "559" stamped on housing it is a lock nut for governor weight support spindle. the spindle has an o ring inside the housing and is adjustable but DO NOT take it out with pump in situ as the governor will fall to pieces and drop inside pump. Pump should come off engine to do it and take off top housing to be sure all is in place before putting back, you should measure the protrusion of the thread before taking off locknut so you can put it back the same
Jonny200tdi
New Member
- Posts
- 1
- Location
- Stoke-on-Trent
I have exactly this problem. £250 seems pretty reasonable. Did the specialist tell you what the problem was?
