Disco 2 Fuel guage ****ed
- Thread starter Denmike33
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 2,061
- Location
- Hertfordshire
If no dodgy wiring it'll be the sender unit attached to the pump in the tank, they are available separately p/no YAD500040 £71.14 inc vat. You have to take the pump out to fit it which means boot carpet up or a square cut in the right place then you can access the pump cover, you then have to be very careful with the 4 pipes connected to the top of the pump as they have very brittle & easily damaged pipe retaining clips which only come with a new pipe so make sure you clean every bit crud from around the clips with paint brush & airline if poss. I've got pics of where you have to cut the carpet & the top of the pump I took when I did mine if you need them. I also remember having to do some soldering as the connections on the sender were different to where they connected to the pump but all straight forward.
- Posts
- 44,846
- Location
- East Dorset
Before going mad with a new sender, do make sure you isolate i.e. take off, the connections to it and put a meter on it to be absolutely sure that is the problem.
I NEVER believe in that sort of coincidence. Far more likely to be a wiring issue, IMHO.
I NEVER believe in that sort of coincidence. Far more likely to be a wiring issue, IMHO.
Yeah I used a relay and in line fuse per pair of lights. Wired straight to the battery
- Posts
- 44,846
- Location
- East Dorset
