frreelander 1 clutch arm snapped need hlp

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

ste.s

New Member
Posts
6
the misses has broke the freelander again,the clutch pedal goes straight to the floor,ive found that the arm that the slave cylinders moves has snapped,can i just replace that part or is it a new gearbox,its the arm outside the gearbox,anyone know what its called.
im hoping its not too dear
thx
 
its the other part,you have the cylinder which pushes an arm on the gearbox(at the top of the arm is a round ball like socket),in turn engages the clutch.
i can picture the part dont know what its called
cheers
 
The clutch fork?





Edit:

I know what you mean now, you have to buy the whole slave to get that arm and ball joint (£50 - £70)
 
Last edited:
Ive just looked at the haynes and this arm continues into the gearbox so its the clutch fork
is the clutch fork all one piece if so is expensive
 
Hello,
something like that hapened to me last summer,
mounting plate (part UUU100690) broke due to rust on the Clutch Cylinder (part STC000210) support, Clutch Cylinder broke away leaving small metal rod connected to clutch,
made me drive 15 km in 2nd gear at 3am to get home,
left the fixing to my brother, he said it was quite easy, hardest part was fiting the Pipe to the clutch pedal.

best regards
Miguel Baptista
 
£30-40 all one peice, you'll have to remove gear box to fit. might as well change the clutch while your in there!
 
baptista said:
Hello,
something like that hapened to me last summer,
mounting plate (part UUU100690) broke due to rust on the Clutch Cylinder (part STC000210) support, Clutch Cylinder broke away leaving small metal rod connected to clutch,
made me drive 15 km in 2nd gear at 3am to get home,
left the fixing to my brother, he said it was quite easy, hardest part was fiting the Pipe to the clutch pedal.

best regards
Miguel Baptista
Click to expand...


Miguel
Yes not too difficult to change that bit, a little unfortunate with the timing though
 
Cheers ill order one today just dreading opening the gearbox
as im hoping therrs no damadge there
thanks for your help
 
You must log in or register to reply here.

Similar threads

F
Freelander 1 Clutch Pressure
Replies
12
Views
2K
Alteredtech
Alteredtech
anubis757
Freelander 1 Please opinions, Ideas, fixes.....
Replies
9
Views
906
andyfreelandy
andyfreelandy
MuddyMat
Disco2 2004 TD5 clutch misbehaving
Replies
5
Views
721
MuddyMat
MuddyMat
G
Puma Clutch Replacement
Replies
1
Views
604
grayham49
G
S
300Tdi clutch
2
Replies
39
Views
4K
Anaconda
A
Back
Top