Disco 2 Front wing

ROY SIMPSON · Jun 19, 2017

What are disco2 outer front wings made from and is it possible for repair shops to weld pins to them to pull out dents.
Thanks for your replies

Shimsteriom · Jun 19, 2017

Would it not be easier to get a new (2nd hand) wing if it needs that much work?

brian47 · Jun 19, 2017

Disco 2 outer wings are alloy. The only steel bits are the four side doors, the roof and the floor, in short the only bits of the body which rusts. I haven't looked too closely at the sills, but I would presume that there is some steel in there somewhere.

ROY SIMPSON · Jun 20, 2017

Recently took my accident damaged disco (not my fault) to other parties insurers repair shop for inspection prior to repair where inspector said they could pull out dent using described procedure.
Just wondered how feasible this was given that I thought but was not sure wings are alloy.
Thanks for your replies.

neilly · Jun 20, 2017

ROY SIMPSON said:
where inspector said they could pull out dent using described procedure.

As long as they repair it to the satisfactory level, I would not worry how they do it. That is their problem and the other parties insurance cost issue.

Cheers

Disco 2 Front wing

ROY SIMPSON

Active Member

Shimsteriom

Master Procrastinator

brian47

Well-Known Member

ROY SIMPSON

Active Member

neilly

Well-Known Member

Similar threads