Series 2 Front Prop shaft too short

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

splashback

New Member
Posts
6
Location
Ireland
Hi Everyone, could do with some expertise, bought a 2A unseen a few years ago, mistake I know, and as we are at the final stages of rebuild find that while rear prop shaft is fine my front one is 25mm short, some one suggested its something to do with shackle plate angle.
Any advice much appreciated
245050-da287c623027e67b3a8c67a31058fa1b.jpg
245051-a3f0fc2638275ccd8f53dc58a511c847.jpg
245052-ef29764e476fd578ced6f54f0b0e6dd4.jpg
 

Attachments

  • IMG_0242.JPG
    IMG_0242.JPG
    356.1 KB · Views: 179
  • IMG_0245.JPG
    IMG_0245.JPG
    432.4 KB · Views: 190
pic of rear of front springs would help is engine actually in place thinking springs not compressed enough.
 
Ps I cannoot the shackle plates being an issue, yours look fine
Have a measue between the diff and tfer box flange and see what others say theirs measure at?
 
Your spring shackle looks fine loosen the rubber boot on the propshaft and check it is extending fully.
What engine have you got fitted that caused issue with bulkhead?
Is the propshaft the original one that was fitted when you bought it or a replacement, if replacement check it is correct part number.
 
You must log in or register to reply here.

Similar threads

S
Front Prop Shaft Shrunk
Replies
7
Views
782
Hippo
Hippo
Frisol
Series 2a Gearbox Rebuild - Front Output
Replies
8
Views
2K
boguing
boguing
proto57
Freelander 2 (LR2) Baffling (to me!) front Half-shaft/Axle Length Mystery! Too short, twice???
Replies
10
Views
858
Zorro587
Zorro587
G
Dating my Series 2A
Replies
16
Views
3K
Guidoma
G
J
Options for adding CDL - 2003 D2 V8 Auto
Replies
4
Views
798
sierrafery
sierrafery
Back
Top