Front prop shaft cardon joint gone. 2 options? Details needed!

So my cardon joint has gone. Fortunately only at slow speed as I was driving around town, fingers crossed there isn't any other damage. It' been "clunking" in and out of gear for a couple of weeks now. Then on Friday there was a horrible noise as I was driving along. Stopped and checked and sure enough it's totally knackered.

I need the car back up and running asap for obvious reasons! Had a look on ebay at the bearing kits but they are all being sold by the same seller who states he is on holiday until the beginning of July! Some googling reveals that his company appears to be the main supplier of these kits

So, option 1: find a kit elsewhere. Can anyone point me in the right direction?

Option 2: replace the whole prop shaft with a used one off ebay. There's lots on there. Is the shaft the same on the auto and manual models?

Thanks in advance!

Bailey Morris in St.Neots, Cambs made up my front and rear props. They do off the shelf or custom made dimensions. Ain't cheap though!

Bailey Morris Limited - 4x4 Extreme Land Rover

auto and manual are the same prop ,just buy a new one then rebuild yours later and sell it

Eventually managed to track down a centre bearing on ebay:
Land Rover Discovery 2 Front Double Cardan Centre Device Bearing | eBay

Not cheap! Also found the other bearings elsewhere for £3.95 a pop! Ordered 3 sets. Fingers crossed it'll all come by Tuesday so I can get it back together.

They're a pain to do but possible good luck

Has your D2 got diff lock? If so, just remove front prop and run round with it engaged while you get it sorted.

Have a good look at the middle joint aswell to make sure it hasn't bent or rubbed away in any of the cups

No diff lock, although I've read elsewhere on here today that some do have it just not connected up. Unfortunately the car is still at work so I can't check until the morning. It's an early 02.