I have a rangerover l322 2006 model the problem is my front parking sensors don't work tested the sensors all ok carried out a continuity test from sensor to module all ok now the rear are working fine so decided to check the front buzzer there isn't one my first thought was that the previous owner may have removed it but no there is no connector hanging anywhere so my question is where does the soud come from them eny help much appreciated. Oh I am new here still trying to find my way around thanks
L322 Front parking sensors
- Thread starter Bond007
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
I would expect one buzzer to be used for front and rear as front and rear sensors are never likely to be active at the same time. The sound is probably generated electronically and there will just be a little speaker somewhere in the dash.
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
Try tracing it through the wiring diagram in Rave
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
Are they OEM or after market?
Hi oem I also carried out a diagnostics but it's not showing anything wrong if I go line and look up front buzzer it shows similar to the back and there's a location under the dash above the foot peddle but there never seems to have been one there I am wondering if there was an upgrade on the 2006 model but cant fined no information anywhere
The sound speaker on an 04 is above the pedal and I believe front and rear sounds which are different come from the same speaker but could be wrong . I had an error last week saying the front sound or parking was not working I cleared error as I was under there looking for the havac resistor and disconnected the wiring to do that , the parking ecu had picked that up , but all fine now.I don.t know if that helps.
I had the 03 model before this and the front speaker was at the front but the 06 I have now theres not even a tail coming from the so no connector it's a puzzle while I had the 03 I tried swapping the ECU unit it case it was that still the same thanks for the help the search goes on.
- Posts
- 58,170
- Location
- Preston Lancs.
It's a good job you people who seem to need parking sensors don't drive E Types.
Or Alfa GT;s , to be fair they do but you also nrrd a camera.
darrenm
Active Member
- Posts
- 670
- Location
- Chorley Lancashire
Have you plugged it into a iid tool mine recently played up all sensors working but couldnt delete the fault decided to remove the rear bumper only to find a trapped wire
- Posts
- 58,170
- Location
- Preston Lancs.
If you need front parking sensors, maybe you should learn how to drive. For rear fit a tow bar, if you hear a crunch stop reversing.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
I have a rear parking sensor on my P38...
Does make an odd noise when you're "too close"..
Does make an odd noise when you're "too close"..
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
I can imagine you did. If her skills are lacking and you 'can drive', why not try teaching, instead of telling?
- Posts
- 58,170
- Location
- Preston Lancs.
Tell her it's a bit like having a washing machine when you can't iron.
brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
Does the seat not rise up, she cant be any shorter that my wife and the p38 is the first car she can actually see the bonnet off.
Jon Dor
Well-Known Member
- Posts
- 1,672
- Location
- Beverley, East Riding of Yorkshire
Out of interest, the front and rear sensors on my A8 go off at the same time if they're "active". Can drive you mad in close traffic on a hill if vehicles fore and aft creep too close! Easy to switch them off individually as required. When BOTH going off, each with their own squarking getting more persistent before sounding continuously when VERY close is really annoying!
