Front Parking Sensors L322 2008

Hi all,

The two front central parking sensors (nearest to the number plate) are not clicking. Is there a quicker route to them which does not include removing the whole front bumper?

Thanks,

Jon

I followed the routine described below.

#13

I'd advise putting some tape on the bumper around the sensor and supporting the screwdrivers whilst levering the sensors out.

www.landyzone.co.uk/land-rover/l322-front-parking-sensors.342080/

I found the sensor housing to be simple enough to remove from the bumper.
Unclipping the central barrel sensor from the housing was a sod of a job.
As the plastic clips had never moved in years and were easily broken.
It's well worth taking your time and teasing them apart, to allow the sensor to pull/push free.