Front nudge bar, where do I get one?? Also recommend me some mods :)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mr East

New Member
Posts
2
Location
Lowestoft, Suffolk
Hi all,

I’d like to make the front of the car appear a little more aggressive, was looking at nudge bars on eBay, but they’re all the same style!? Anyone have any aftermarket bars fitted?? Does the freelander have an aftermarket parts website?


Also, I’m open to any other recommendations for mods?

TIA
Joshua.
 

Attachments

  • B7D7A50C-6CC6-4771-A149-9E6791BF244C.jpeg
    B7D7A50C-6CC6-4771-A149-9E6791BF244C.jpeg
    328.8 KB · Views: 215
one of the best things I put on are my new tires they are the new Michelin latitudes they look great and make it look a bit more beefy
 

Attachments

  • DSC_0030.JPG
    7.2 MB · Views: 193
Mine looks like this, complete with LED light bar.
View attachment 133340

FFS Nodge, a little bit if sick just popped up there...

Will have to convince my daughter that I will be spending more money on 'her' TD4... However I will refuse to fit a CB radio for the time being...not wanting all the farmers around where they live distracting her whilst she drives the country roads.....

Easy enough to fit??
 
Last edited:
Hi all,

I’d like to make the front of the car appear a little more aggressive, was looking at nudge bars on eBay, but they’re all the same style!? Anyone have any aftermarket bars fitted?? Does the freelander have an aftermarket parts website?


Also, I’m open to any other recommendations for mods?

TIA
Joshua.

Hello Joshua,

Welcome to the forum.

Regards 'mods' I think that some of the members have a fair point when they mention things such as tyres etc before you start 'laying out' on the cosmetic stuff.

FL 1's have some specific issues that, if not looked into could end up costing you a lot of money. Probably the most important is the condition of your tyres. It is recommended that you firstly confirm that you have the exact same tyres on each 'corner' by brand and specification. Secondly you need to check that, of those tyres, the less worn tyres are fitted to the front axles....if the tyres are in roadworthy condition, obviously. The drive system on the Freelander 1 can be seriously damaged if this is not carried out. Mixed brands, wrong specs etc will destroy items of the drivetrain, that, collectively may be more expensive than the initial outlay of the car. The drivetrain, specifically the IRD(transfer box), VCU and differential are all susceptible to damage as well as the gearbox.

My first purchase was 4 X tyres.....the destruction of the components mentioned above can happen over a relatively short period of time.

Try these(recommended by Nodge)

https://www.blackcircles.com

If the car is running 'ok' then, depending on what model/engine, the next steps for helping to mitigate future problems are to be found on this forum, using the search facility (sometimes not easy to do for a 'Newbie' ;-) failing that drop questions in a new thread. Been there, done that (fairly recently)... Keep your 'chin tucked in' though as some forum members can seem cynical and sarcastic at times but bare with them as they know more than ANY dealership and many specialists too (I can see my 'likes' count soring)

Worth looking on 'The Tube of You' also for some info...but remember, some 'creators' on there can be down right dangerous...

I have progressed from having an immaculate(on the surface at least) facelift TD4 on purchase, to a lumpy running, dangerous beast, back to a car that is very much liked by myself and my daughter...it has taken a few hours of 'wielding' the spanners to get it there...and there is still a bit to go...

The 'shiney bits' can come later....
 
Forgot to ask...

1. Any cooling issues?

2. Wheredyagetit????

No cooling issues with a TD4.

Where'd I get what?
The bar came from Rimmer's at a clearance price of about £60.
The LED light bar took lots of research, so I didn't end up with substandard. I eventually got if off fleabay for about £26 which is a good price for a bar with 42 3 Watt Cree emmiters.
 
Last edited:
No cooling issues with a TD4.

Where'd I get what?
The bar came from Rimmer's at a clearance price of about £60.
The LED light bar took lots of research, so I didn't end up with substandard. I eventually got if off fleabay for about £26 which is a good price for a bar with 42 3 Watt Cree emmiters.

Cheers...answered fully!!
 
That is a tidy bus sir. Perfectly modded.

Why thank you :D It's been a pain this week but new clutch, flywheel, gearbox and IRD have got it singing again :D

What head light bulbs do you have?

I Use H1 led bulbs off amazon and i modified the headlight housing to use projector lenses. Still got to fit the headlight washer kit though, been busy enough with it this week as it is and need to get it mot'd!
 
Back
Top