Graham Prentice
New Member
- Posts
- 2
I have a 1996 Defender 110. I am looking for the grease/oil specs for my front Hub, aside from the One Shot.
any help is appreciated
any help is appreciated
Front Hub Grease
- Thread starter Graham Prentice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
One shot is the grease to use... even comes in a handy container to pour it straight in
steve2286w
Well-Known Member
- Posts
- 4,522
- Location
- monkeyangerland
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
It's the same oil for the axles/transfer so if you have some there's the answer.
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
EP90 isnt as simple as fill it with EP90.
Ideally any previous grease has to be cleaned off/drained.
Got to be 100% certain that your swivel balls are in excellent condition, swivels seals excellent condition, flanges need RTV.
Can also remove the inner seal on the stub axle to allow EP90 to migrate from the diff through to the bearings.
If not they will leak.
Ideally any previous grease has to be cleaned off/drained.
Got to be 100% certain that your swivel balls are in excellent condition, swivels seals excellent condition, flanges need RTV.
Can also remove the inner seal on the stub axle to allow EP90 to migrate from the diff through to the bearings.
If not they will leak.
Graham Prentice
New Member
- Posts
- 2
Thanks....
Similar threads
