Front height sensor connectors.

PPP38vouge · Apr 6, 2014

Morning everyone,
Does any body know if I can purchase new height sensor connectors? The reason I ask is I have noticed that the connector on the passenger side is a very tight fit and requires a firm push to completely seat on the sensor whereas the drivers side is a lot looser and slides very easily, not sure if this has any bearing on my current issue but it is something else to eliminate.
Thanks in advance
Paul.

pmallinson · Apr 6, 2014

PPP38vouge said:
Morning everyone,
Does any body know if I can purchase new height sensor connectors? The reason I ask is I have noticed that the connector on the passenger side is a very tight fit and requires a firm push to completely seat on the sensor whereas the drivers side is a lot looser and slides very easily, not sure if this has any bearing on my current issue but it is something else to eliminate.
Thanks in advance
Paul.

I would look here VWP - multiconnectors at the waterproof ones and then all you need to do is remove the original ones and solder the new ones..

This is a GREAT company I have used for many years and always really helpful and fast with their orders

gfromleeds · Apr 6, 2014

Cut them off and direct solder them but make sure you waterproof it

Datatek · Apr 6, 2014

With a bit of fiddling, you can tighten the connectors.

PPP38vouge · Apr 6, 2014

Datatek said:
With a bit of fiddling, you can tighten the connectors.

Hi Datatek , thanks for reply, what would I have to do to tighten connectors, feel the drivers side is a tad loose.

Datatek · Apr 6, 2014

PPP38vouge said:
Hi Datatek , thanks for reply, what would I have to do to tighten connectors, feel the drivers side is a tad loose.

The connectors in socket half on the loom can be carefully sqeezed to make them tighter.

Front height sensor connectors.

PPP38vouge

Active Member

pmallinson

Member

gfromleeds

Well-Known Member

Datatek

Well-Known Member

PPP38vouge

Active Member

Datatek

Well-Known Member

Similar threads